Choose The Right Water Purifier For Your Home

No matter how to wash your drinking tap water seems, there is absolutely no guarantee that it is pure and germfree. It could contain microscopic germs which result in diseases, new era contaminants like lead and arsenic along with some exact high degree of TDS (Total Dissolved Salts).

Around 8 significant cities in India, drinking water-borne diseases like cholera, jaundice and typhoid accounted for around 77 percent percentage of most the diseases in India. The poll also threw light on the fact that the TDS levels are far above the permissible amount in most regions in India, including cities like Mumbai, Delhi, Bangalore.

You also might think that boiling your water until you drink it is fine enough. But this is not anywhere near the truth. Boiling only provides protection against microbial contamination caused by bacteria, virus, plus it generally does not remove dangerous chemicals/new age contaminants like lead, pesticides and physical impurities like sand, dust, and rust, and etc..)

Also, check hereĀ aquasure water purifier and then buy the best one for your home

Therefore what is it that you can do to ensure that the quality of drinking water that your family gets is safe and pure?

Many families are turning to water purifiers to be certain that their drinking tap water is safe and healthy. However, with the market flooded with plenty of brands how do you really realize what water purifier to pick?

Just a little bit of investigation is all that you want before you get your water purifier. The first and foremost thing that you need to understand is what your own water condition is real. Once you know this do you understand the kind of water purifier you will need to buy. Listed here is the thing you have to find out in regards to the various technologies available in the market.

Reverse Osmosis

If you live in a region where you buy hard water then RO water purifiers are ideal. If the TDS (Total Dissolved Salt) levels in your water transcend the permissible limit then it poses a serious threat to your health. RO water purifiers reduce the TDS material in your water to a permissible level and ought to be used only if the level of Total Dissolved Salts in water is very high.

RO (Reverse Osmosis) functions applying high pressure over the water depending on the degree of salt material; it is then forced through a 0.0001 micron, semi-permeable membrane. RO will allow cross filtration of water, even in which the contaminants are caught in the system. The impure drinking water moves one way and also the wash water travels another manner. The cross filtration enables the impure water to sweep off the contaminants with it thus, preventing a build up.

Typical RO purifiers remove more than 90% of those TDS and most of the impurities found in the water. These impurities may include bacteria, virus, protozoa, cysts, coliform, physical and chemical contaminants etc..


UV water purifiers are ideal in locations where you purchase soft drinking water like that from rivers or lakes as well as at which in fact the TDS degree is under 500mg.

In purifiers that use UV purification, a lamp is utilized to create UV beams to which the water is exposed. The ultraviolet rays penetrate into the microorganism and alter its DNA, once this is done then it is essentially killed and can not lead to any infection or even reproduce! This system destroys roughly 99.99 percent of organisms which cause diseases!

All these purifiers tend not to alter the chemical composition of the drinking water or alter its particular taste. Since it willn’t alter the chemical composition of plain water it can’t be utilized in locations where you obtain hard water.

Carbon Adsorption

If water is handed over the carbon surface the contaminants are drawn to the top. The carbon is processed to create it extremely porous, so this provides a huge surface area for adsorption or chemical reactions. These carbon filters normally utilize high carbon or carbon blocks of powdered carbon. It is actually a widely used engineering and is quite effective in getting rid of pesticides, herbicides, chlorine, radon and different chemicals. The quality of the filters has been ranked by the size of particles that it may get rid of. A filter which measures 0.5 micron is more effective compared to the one that steps 10 microns.

Extremely filtration (UF)

This method of purification eliminates dissolved solids between your sizes of 0.005-0.1 microns. A lot of times it is employed as a pre- treatment step before Reverse Osmosis (RO). The extremely filtration system works like a molecular sieve also it separates molecules based on the size. The drinking water passes through a very fine filter which retains most macromolecules which are above a certain size like colloids, microorganisms etc.. Smaller molecules like solvents pass throughout the filter. They operate well in areas where the TDS degree is under five hundred mg/liter.


This procedure of purification is ideal if you live in an area where you obtain hard H20. To convert hard water to soft water, the water is passed over an ion exchange resin. Water flows over the surface and dissolves the sodium. The calcium, magnesium and other cations precipitate onto your top layer. Ion-exchange can lower hardness in the water. It might also obtain rid of contaminants like iron, aluminum, lead, barium, radium, and nitrates. This tech is usually integrated into water purifiers along with other approaches.